Sock Fiber Review

Now that I've got some sock spinning under my belt, it's time to get systematic about what fibers I've used and how I like them for socks.

First, though, the basics:
  • My goal is to produce thin wool socks that I can wear in the office. So: not slippers, "house socks", boot socks, or hiking socks. My aim is 14-20WPI, with the higher end for dress socks and the lower for "casual" socks. I measure by taking a photo of several strands draped over a measuring tape, so I'm essentially measuring yarn diameter when the yarn is completely relaxed.
  • I want the socks to last longer than 2 years without having to darn them, with 2 days/wk wear 8 months of the year, and 1 laundry cycle/wk (laundry = machine wash in a front-loader, air dried). I'm trying to see what it takes to get this without adding nylon, but if it turns out I cannot achieve it, then so be it. So far, I have not been successful in producing 100% wool socks that clear this hurdle. When I do become successful, you'll be the first to hear about it!
  • I spin on a wheel, not a spindle, so I can't give advice on the latter. I also spin exclusively 3- and 4-ply sock yarn. Never 2-ply. If I were able to spin higher plies, I would. I find I get more consistent and even yarn this way, and I find it also "mixes up" colours better. Also I like the feel of a multi-ply yarn better. 
  • I use commercially-prepped combed tops (I suspect mostly from John Arbon, World of Wool, and Louet, via several independent resellers / dyers). I sometimes use locally-sourced pin-drafted (carded) rovings from small local mills. I currently do not have the time or resources to comb/card/blend raw fleece.This limits the blends I can try.
So far, here are my broad-stroke conclusions, based on 8 pairs of handspun socks and 2 years of wearing the oldest pairs (with holes by now). ** I fully expect these conclusions to change, based on more experience in spinning and wearing the socks, and I will be editing this page as my opinions change. Just so y'all know. **
  • In my experience, yarn diameter is the single most important determinant of handspun sock longevity. It matters less how you ply, or how much twist you use, or what breed you use. If you make thicker socks, they will last longer.
  • very important: knit at a tight gauge. It is crucial to do this. Handspun socks require a tighter gauge than millspun yarns with nylon. The sock should feel almost stiff. You need to be knitting at upwards of 9 st/in for fingering weight yarns. My handspun is denser than millspun; I use needles at least one, sometimes two sizes smaller than I'd normally consider for millspun yarns.
  • I think that fibers in the 25-30 micron range are too fine for me. In my experience socks made with these fibers wear too quickly, no matter how I spin and ply them. Yeah, I know there are lots of folks who swear you can use merino, cashmere, angora, etc etc as a home spinner, and get great socks...but I haven't seen their socks to see how thick they are compared to what I'm trying to achieve, nor have I got any good data on how hard/long/frequently their socks get worn. All I can do is go by my own experience, which is that the finer fiber I've used doesn't last me long enough when spun to 14-20 wpi.
  • Southdown is my favourite fiber for casual socks; I just love its bounce and elasticity. It withstands twists of 20TPI and still gives lovely yarn. However I have not been able to get long-lasting socks out of it. I'm coming to the conclusion that I need to reinforce with nylon when I use this fiber, to get the longevity I want.
  • Dorset, Suffolk, and Cheviot are coarser and less elastic. I've not had these socks long enough to wear them out, so I can't tell you how these compare to Southdown quite yet. I've found that I can't spin these breeds as hard - max 16 tpi in the ply for Cheviot and Dorset, and closer to 12 for Suffolk, before I end up with harsh "string".
  • BFL is nice, but too fine for me "pure", at less than 30 microns. Luckily, it's commonly available in a "superwash with nylon" blend, which makes a really nice dress sock that's hard wearing, for those who just want to spin something that lasts without worrying overly about twist and plying style. Of course, there's also merino/nylon blends easily available, but loyal readers know how I feel about merino. 'nough said.
  • Romney and Leicester are longwools that are coarser than BFL. I'm doing "wear tests" on a 100% local Romney pair right now, and so far they are proving very tough, surviving a fall backpacking trip in the Smokey Mountains with no wear that I can see!
**update Sept 2016**
After some serious wear testing this summer, using hiking boots and handspun socks worn for days at a time, I've come to the conclusion that southdown from the UK is not good enough for socks for me. A local Romney is much, much better. Presumably this stuff is >30micron, because it's from local hobby farms where the sheep are not bred for their fiber. So far, the local Romney is the most likely candidate to hit my longevity goal. 

Another update, I've decided that Finn is a useless wool for socks, it felts basically instantly. Unless you want slippers, I don't recommend it for socks.

Now, here are some reviews of fiber I've tried:
1. Sock Fiber Review 1: I try a couple of "downs breed" fibers, which are supposedly very good for socks. I try and like Southdown and Dorset, both commercially combed top. Both give resilient yarn, very springy, regardless of spinning style (short forward draw -"worsted" - or long draw - "woolen") or plying style (straight 3 or 4 ply, or cable). The yarn is not smooth, but somewhat "hairy".

2. Sock Fiber Review 2: I spin up some longwool breeds: Border Leicester and Blue Faced Leicester or "BFL". The former is a carded prep (from a local source) and the latter, superwash commercially combed top. I come to the conclusion that a combed prep is preferable (unless you like really fuzzy  socks), and that a straight 3 or 4 ply is better than a cable-ply; the former gives more spring to the yarn which is otherwise not elastic at all. The carded prep yarn is very, very fuzzy, while the combed superwash is smooth and shiny - excellent dress-sock material.

3. Sock Fiber Review 3: I try some "dual-purpose" sheep: the north american Polypay breed and an Exmoor Blueface cross from the UK. Both breeds give very springy yarn, with the former being very fine and soft (and thus not suitable for socks, IMO) and the latter being close to Dorset but somewhat smoother (less hairy yarn), excellent for socks.

4. Sock Fiber Review 4: I give a local longwool - Romney - a try, and some Jacob, which is a heritage breed.  The Romney is a carded prep from a local mill, it feels very strong. The Jacob - in a very nice natural "black" - is dry and very poofy.

5. Where've I Been : on holidays! Testing handspun socks! A local Romney is the best I've come across.

6. Sock Fiber Diaster : in which I ruin a nice pair of Finn/nylon socks by washing them in the machine.

7. Socktacular Experiment, volume 1: I order a bunch of local rovings for a sock-spinning experiment!

8 comments:

  1. Thisnis excellent. I am just spinning a NZ Romney 3ply as a test for nylon free, fine socks so was really interested in your opinion. I can't wait to get them finished to see how they go. I need to keep at it becausenwe are coming in to spring so I will soon not need them.
    Happy tramping/knitting.

    ReplyDelete
  2. Superbly useful information. 😀 Thanks for this, going to bookmark this page and come back for a more in depth read when Spinzilla is over.

    ReplyDelete
  3. Do you not get "itch factor" with wool and your feet? Genuinely curious. I use merino and BFL and other wools like that simply because I can't handle having the coarser stuff on my feet. It not only itches; it can actually hurt. It makes reading your blog fascinating, because you basically try for the exact opposite type of sock as I am going for!

    ReplyDelete
  4. Nope. I do not suffer from any wool-related itch factor on my feet. In fact I seem to be rather insensitive to rougher wools: only when I get hot do I start getting itchy, and then it's only around my neck and upper back.

    ReplyDelete
    Replies
    1. That's very awesome! I've been trying to decrease my sensitivity to various wools with some minor success, but many of them still bother me.

      Delete
  5. This is so helpful,thank you. I'm new to spinning and really want to spin yarn with a purpose. I love knitting socks so it would be the logical progression for me. Thanks again.

    ReplyDelete
  6. Thank you for all your hard work in documenting your breed sock experiments. It's tremendously useful to me since my sock longevity goals are pretty much the same as yours. The only thing I would do differently is to add a carry along thread of laceweight mohair/wool under the heel and the second half of the toe because these are areas that wear out first on our socks.

    DH and I walk a lot and despite rigorous toenail cutting, our big toe nails eventually damage both handspun and commercial socks. My remedy is to make brightly coloured patches from commercial yarn scraps over the worn area.

    ReplyDelete